Spectrum-controls 1769sc-IR6I Manuale Utente Pagina 17
- Pagina / 74
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Chapter 2: Quick Start for Experienced Users 2-3
User’s Manual Pub. 0300241-01 Rev. A
1) Check that the bus lever of the module to be installed is in the unlocked (fully
right) position.
2) Use the upper and lower tongue-and-groove slots (1) to secure the modules
together (or to a controller).
3) Move the module back along the tongue-and-groove slots until the bus
connectors (2) line up with each other.
4) Push the bus lever back slightly to clear the positioning tab (3). Use your fingers
or a small screwdriver.
5) To allow communication between the controller and module, move the bus lever
fully to the left (4) until it clicks. Ensure it is locked firmly in place.
When attaching I/O modules, it is very important that the bus
connectors are securely locked together to ensure proper electrical
connection.
6) Attach an end cap terminator (5) to the last module in the system by using the
tongue-and-groove slots as before.
7) Lock the end cap bus terminator (6).
A 1769-ECR or 1769-ECL right or left end cap respectively must be
used to terminate the end of the 1769 communication bus.
Step 3: Wire the module. Reference
Chapter 3
(Installation and Wiring)
!
Attention
!
Attention
- 1769 6 Channel 1
- Isolated RTD/Resistance 1
- Input Module 1
- Important Notes 2
- Table of Contents 3
- Preface 7
- Conventions 8
- Used in This 8
- Chapter 1 9
- Overview 9
- 1.1.2 Data Formats 10
- 1.1.3 Filter Frequencies 10
- 1.1.4 Hardware Features 11
- Section 1.2 12
- System Overview 12
- Quick Start for 15
- Experienced Users 15
- Chapter 2 15
- Section 2.3 16
- What You 16
- Need To Do 16
- Attention 17
- Reference 19
- Chapter 3 21
- Installation and Wiring 21
- 3.3.3 Remove Power 23
- 3.3.4 Selecting a Location 23
- Section 3.4 24
- System Assembly 24
- Section 3.5 25
- Mounting 25
- 3.5.2 Panel Mounting 26
- Section 3.6 27
- Replacing a 27
- Single Module 27
- Section 3.7 28
- Field Wiring 28
- Connections 28
- 3.7.3 Terminal Door Label 29
- 3.7.6 Wiring the Module 31
- Section 3.8 32
- Calibration 32
- Chapter 4 33
- Module Data, Status, and 33
- Channel Configuration 33
- Section 4.2 34
- Configuring 34
- Channels 34
- Section 4.4 41
- Data File 41
- Chapter 5 43
- Diagnostics and 43
- Troubleshooting 43
- Section 5.5 45
- Non-critical vs 45
- Critical Module 45
- Section 5.6 46
- Module Error 46
- Definition Table 46
- Section 5.7 47
- Error Codes 47
- Section 5.8 48
- Module Inhibit 48
- Function 48
- Appendix A 49
- Specifications 49
- Appendix B 53
- Module Configuration Using 53
- MicroLogix 1500 and 53
- RSLogix 500 53
- Section B.2 54
- Configuring the 54
- 1769sc-IR6I in a 54
- MicroLogix 1500 54
- Appendix C 59
- Configuring the IR6I for 59
- CompactLogix Controllers in 59
- RSLogix 5000 59
- Section C.3 62
- I/O Modules 62
- Appendix D 65
- Configuring the IR6I to be 65
- Used with a 1769-ADN 65
- DeviceNet Adapter 65
- Section D.5 67
- Getting Technical 73
- Assistance 73
- Declaration of 73
- Conformity 73
Prodotti e manuali riguardandi Strumenti di misura Spectrum-controls 1769sc-IR6I
(12 pagine)Sealey Měřící nástroje uživatelské příručky
Seznam produktů Sealey Měřící nástroje obsahuje 59 uživatelské příručky pro 59 modelů. Všechny uživatelské příručky pdf jsou k dispozici ke stažení nebo prohlížení online.
Commenti su questo manuale