
Micro800™ 4 Ch Universal Thermistor Input Module 17
Publication 0100198-01 Rev. A
Output Block (0x30 [48] to 0x3F [63])
Output words are not used on this module
but the block space is reserved
Status Block (0x40 [64] to 0x4F [79])
Open circuit status. See Open
Circuit Status Register
(OC_STATUS) information below.
Under/Over Range Status. See
information below.
Enumeration of build based on
major/minor version. (0 to 255).
This value is written by the module
CPU.
Major revision of FPGA code. This
value is hard-coded by the FPGA
and not written by module CPU.
Minor revision of FPGA code. This
value is hard-coded by the FPGA
and not written by module CPU.
Internal register for module use
only.
Open Circuit Status Register (S1_STS_CHAN_OC)
When an open circuit is detected, the open circuit bit is set for the
channel and the input data is set to user Maximum.
Bit 0 for channel 0 open wire.
Bit 1 for channel 1 open wire.
Bit 2 for channel 2 open wire.
Bit 3 for channel 3 open wire.
Bit 4-7 are not used.
Commenti su questo manuale