Spectrum-controls 2080sc-BAC Manuale Utente Scaricare il pdf (Pagina 15)

Chapter 1: Module Overview 1-7

User’s Manual Pub. 0300274-01 Rev. A.0

The six-pin Connector pinouts are as follows:

Signal

MSTP+

GND

LOAD-

LOAD+

MSTP-

1.5.2 Ethernet Connector

The Ethernet connector has a default MAC address that may be changed during

setup. The Ethernet connector may be used as an external communication port to

a personal computer or to another BACnet module. The Ethernet connector is

also used to configure the module.

The default IP address for the module is 169.254.3.3. If the module is already

configured, software is available for you to detect the address. See Chapter 3,

Configuring the Module Using Software.

Pinouts for the connector (crossover) are:

2080sc-BACnet

Module

Personal Computer

1 TX+

2 TX-

3 RX+

4 Not connected

5 Not connected

6 RX-

7 Not connected

8 Not connected

7 Not connected

6 TX-

5 Not connected

4 Not connected

3 TX+

2 RX-

1 RX+

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

Nessun commento

Spectrum-controls 2080sc-BAC Manuale Utente Pagina 15